High Pressure MF-5 Moisture Filter

1.Introduction of High Pressure MF-5 Moisture Filter

The MF-5 oil-water separator has excellent oil-water separation capability. Through its unique separation principle and precise internal structure, it can quickly and effectively separate oil and water. Whether it is oily wastewater produced in industrial production or kitchen wastewater in the catering industry, it can play an excellent separation effect and greatly reduce the oil content in the wastewater.

2.Parameter of High Pressure MF-5 Moisture Filter

high pressure MF-5 Moisture Filter

Roughness of filter element: 40um

Adjustment pressure range: 0.05-0.85mpa

Maximum adjustable pressure: 0.85mpa

Guaranteed pressure resistance: 1.5mpa

Use temperature range: 5-60℃

3.Features

The MF-5 oil-water separator is a unique and attractive high-efficiency separation device with many remarkable product features.

Firstly, its excellent separation efficiency is remarkable, MF-5 adopts advanced physical separation technology combined with fine filtration system, which can quickly and accurately separate oil and water, with remarkable separation effect, greatly reducing the oil content in wastewater and meeting the environmental protection discharge standard.

Secondly, the intelligent operation mode is one of its highlights. Equipped with advanced sensors and intelligent control system, MF-5 can real-time monitor the flow of wastewater, water quality and the operating status of the equipment, and automatically adjust the working parameters to ensure that the equipment is always running in the best condition, reducing manual intervention and improving work efficiency.

In addition, the MF-5 oil-water separator has excellent adaptability. Whether it is dealing with high concentration of oily wastewater or coping with different types of oil and water quality changes, it can play a stable role and is widely used in a variety of fields such as industrial production, food service, automobile maintenance and so on.

In addition, the maintenance of this equipment is very convenient. Its structure is well-designed, easy to disassemble and clean, and the key components are durable and easy to replace, which greatly reduces the maintenance cost and downtime of the equipment.

Moreover, the MF-5 focuses on energy saving and environmental protection. In the process of operation, low energy consumption, low noise, minimal impact on the surrounding environment, in line with the requirements of modern society for green equipment.

Finally, MF-5 oil-water separator has a compact and beautiful design, covers a small area, can be easily installed in a variety of places with limited space, without affecting the overall layout.

In conclusion, MF-5 oil-water separator has become an outstanding product in the field of oil-water separation with its features of high efficiency separation, intelligent operation, strong adaptability, easy maintenance, energy saving and environmental protection, as well as beautiful and compact design. 

4.Selling Points

1. High-efficiency separation technology

    - MF-5 oil-water separator adopts the advanced combination of physical separation and chemical treatment. Its internal multi-stage filtration system, including coarse filter mesh, fine filter mesh and adsorption layer made of special material, can effectively capture and separate tiny oil droplets, so that the oil-water separation efficiency reaches an extremely high level. For example, when treating industrial oily wastewater, it is able to reduce the oil content to a very low level and meet strict environmental discharge standards.

    - This highly efficient separation technology is also able to cope with different types and concentrations of oily wastewater and is widely applicable.

2. Precise oil-water stratification control

    - Equipped with sophisticated sensors and control systems, it is able to monitor the level and stratification of the oil-water mixture in real time. Through intelligent algorithms, the time and flow rate of drainage and oil discharge are precisely controlled to ensure that the separated oil and water are accurately collected and avoid mixing with each other.

    - This feature is especially important under continuous operation conditions, which ensures the equipment to work stably and efficiently, and reduces the cost of secondary treatment due to incomplete oil and water separation.

3. Powerful treatment capacity

    - MF-5 has a large treatment flow rate and capacity, which can meet the wastewater treatment needs of medium and large-sized enterprises or premises. It can treat large quantities of oily wastewater in a short period of time without affecting the separation effect and equipment performance.

    - For example, in the kitchen wastewater treatment of large-scale catering enterprises, it can cope with wastewater discharges during peak periods and ensure that the wastewater is treated in a timely and effective manner.

4. High-quality materials and durability

    - The main structure of the equipment is made of high-strength, corrosion-resistant stainless steel, which is able to operate stably for a long period of time in harsh working environments. The internal filter elements and adsorption materials have good oil resistance and wear resistance, and long service life, which reduces the maintenance and replacement cost of the equipment.

    - The MF-5 maintains good performance and structural integrity even when treating corrosive oily wastewater.

5. Low-energy operation

    - An energy-efficient design and operation mode has been adopted to minimize energy consumption while ensuring efficient separation. Its optimized internal flow channels and efficient power system reduce energy loss and lower operating costs for companies.

    - Compared with traditional oil-water separators, MF-5 can save users considerable electricity expenses in long-term operation.

6. Ease of maintenance and cleaning

    - Designed with ease of maintenance in mind, the unit's components are easy to disassemble and install. Regular cleaning and maintenance can be easily accomplished without the need for complicated tools and specialized skills. At the same time, detailed maintenance manuals and technical support are provided to facilitate routine maintenance and troubleshooting.

    - This ease of maintenance reduces equipment downtime and improves equipment utilization and productivity.

7. High degree of automation

    - With fully automatic operation function, users only need to set the initial parameters, the equipment can run automatically according to the preset program, including automatic feeding, separation, oil drainage and fault alarm. It reduces the error and labor intensity of manual operation and improves the working efficiency and safety.

    - MF-5 can run stably even when unattended, providing a reliable solution for enterprises to realize intelligent wastewater treatment.

8. Compact structural design

    - Despite its powerful functions and treatment capacity, the MF-5 has a compact structural design with a small footprint. This allows it to be installed and used in places where space is limited, such as kitchen corners and factory floors, improving site utilization.

    - The compact design also facilitates transportation and installation of the unit, reducing the difficulty and cost of project implementation. 

5.Safety Precautions

1. Electrical Safety

    - Before operating the MF-5 oil/water separator, make sure the equipment is properly grounded to prevent electric shock.

    - Check whether the electrical wiring is in good condition to avoid short-circuiting due to broken or aging wires.

    - Do not disassemble or repair electrical parts by non-professionals.

2. Pressure control

    - Pay close attention to the pressure changes inside the equipment to ensure that the pressure is within the normal working range.

    - Excessive pressure may lead to equipment failure, leakage or even explosion. Suitable safety valves and pressure monitoring devices should be installed.

3. High temperature protection

    - If the equipment will produce high temperature during operation, take protective measures to prevent personnel burns.

    - Post high-temperature warning signs to remind operators to pay attention.

4. Chemical exposure

    - When dealing with oily wastewater, may come into contact with some chemical substances, the operator should wear protective gloves, goggles and other protective equipment.

    - Avoid direct skin contact with wastewater and chemicals.

5. Equipment Installation

    - When installing the MF-5 oil-water separator, follow the installation instructions to ensure that the installation is firm and stable.

    - The installation location should be far away from fire source, inflammable materials and crowded areas.

6. Regular Maintenance

    - Establish a regular maintenance program to inspect, repair and maintain the equipment.

    - Maintenance should first turn off the power of the equipment, and in a prominent position hanging "under repair, no operation" sign.

7. Operation Training

    - Operators should receive professional training to familiarize themselves with the operating procedures and safety precautions of the equipment.

    - Untrained personnel are strictly prohibited from operating the equipment.

8. Good ventilation

    - The place where the equipment is installed should be well ventilated to eliminate possible harmful gases.

9. Emergency Handling

    - Understand possible emergencies, such as leakage, fire, etc., and make appropriate emergency handling plans.

    - Provide suitable fire extinguishing and emergency rescue equipment near the equipment.

10. Safety Signs

    - Post obvious safety signs on the equipment, such as "High Pressure Danger" and "Beware of Scalding". 

Customer Concerns and FAQs

Q1: What is an MF-5 oil-water separator?

A1:The MF-5 oil-water separator is a device designed to separate oil from water in industrial processes, such as wastewater treatment or oil production. It is engineered to efficiently remove oil and other hydrocarbons from water, ensuring compliance with environmental regulations and reducing the impact of pollutants on the ecosystem.

Q2: How does the MF-5 oil-water separator work?

A2:The MF-5 oil-water separator operates on the principle of gravity separation. It uses a series of baffles and coalescing plates to slow down the flow of water, allowing oil droplets to rise to the surface and be collected. The clean water then exits the separator, while the oil is removed for proper disposal or recycling.

Q3: What are the main features of the MF-5 oil-water separator?

A3:The MF-5 oil-water separator is known for its robust construction, high separation efficiency, and low maintenance requirements. It typically includes features such as corrosion-resistant materials, easy-to-clean components, and a compact design for space-saving installation. These separators are engineered to handle a variety of flow rates and oil concentrations.

Q4: What types of oils can the MF-5 oil-water separator handle?

A4:The MF-5 oil-water separator is capable of separating a wide range of oils, including crude oil, lubricating oils, and other hydrocarbons commonly found in industrial wastewater. It is designed to handle both light and heavy oils, as well as emulsified oils.

Q5: How do I maintain the MF-5 oil-water separator?

A5:Regular maintenance is essential to ensure the long-term performance of the MF-5 oil-water separator. This includes periodic inspection and cleaning of the coalescing plates and baffles to remove any accumulated oil and debris. It is also important to monitor the flow rates and adjust the operation as necessary to maintain optimal separation efficiency.

Q6: Are there any safety precautions I should take when using the MF-5 oil-water separator?

A6:Yes, safety is crucial when operating an oil-water separator. Always follow the manufacturer's safety guidelines and use appropriate personal protective equipment (PPE) when performing maintenance or inspections. Ensure that the separator is installed in a well-ventilated area to prevent the buildup of potentially hazardous gases.

Company Profile

BSS Pneumatic Tools Co., Ltd. is a leading enterprise specializing in the research and development and sales of pneumatic tools, with 15 years of industry experience. The company is committed to providing high-quality products such as air spray guns, pneumatic tools，grease injectors,and paint sprayers to meet the needs of various industries. BSS Pneumatic Tools has established a good reputation in the market with its outstanding product performance and high-quality customer service. We look forward to becoming your long-term partner in China.

Adhering to the service concept of "customer-centric," the company provides convenient and fast services through cooperation with over 1,000 distributors. The sales hotline of BSS Pneumatic Tools is 0576-86978456