As an important spraying equipment, the spray gun is widely used in industry, construction, automobiles and other fields. In order to ensure the normal use of the spray gun and the safety of the operator, the following are some points to note when using the spray gun:

 

Safe operation:

Always wear appropriate protective equipment, such as goggles, protective gloves and gas masks (if harmful chemicals are sprayed).

Use the spray gun in a well-ventilated area and avoid working in a closed space or poorly ventilated environment.

Make sure the spray gun and power supply are away from water and flammable substances.

 

Check the equipment:

Before use, check whether the spray gun is intact, especially whether the connection between the nozzle and the spray gun body is tight.

Check whether the air source and liquid supply are stable, and make sure that all connections are tight and there are no leaks.

 

Correct adjustment:

According to the characteristics and requirements of the spray material, properly adjust the spray pressure and spray mode of the spray gun.

Do not set the spray pressure too high to avoid uneven spraying or damage to the sprayed object.

 

Keep clean:

Clean the spray gun regularly to avoid clogging the nozzle or affecting the spraying quality.

Use appropriate cleaning agents and tools for cleaning, and make sure to rinse and dry the spray gun thoroughly after cleaning.

 

Correct Use:

Before you start spraying, test spray on a discarded object to ensure that the spray effect is as desired.

Keep the spray gun at an appropriate distance from the object being sprayed when spraying, and avoid staying in the same position for too long.

Avoid pointing the spray gun at yourself or others during spraying to prevent accidental spraying.

 

Maintenance and Care:

Perform regular maintenance and care on the spray gun, including replacing worn parts, cleaning and lubrication.

Follow the manufacturer's guidelines and recommendations to ensure long-term stable operation of the spray gun.

 

Pay attention to chemicals:

If you are spraying hazardous chemicals, be sure to follow the relevant safety operating procedures and chemical handling guidelines.

Do not pour hazardous chemicals into the drain system or expose them to the environment.

 

Storage and Transportation:

When storing and transporting the spray gun, make sure it is placed in a dry, ventilated place and avoid contact with heat sources and direct sunlight.

Do not store the spray gun mixed with flammable or corrosive substances.

By following the above precautions, you can ensure the safe use of the spray gun and extend its service life. At the same time, you can also improve the efficiency and quality of the spraying operation.